Before Starting To Use ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙7 - IHI Shibaura Rabbit P456 Instruction Manual

Before starting to use
Warning (1) Make sure that all standard equipment/accessories are included in the
package.
(→ p.29 - p.31 "Specifications")
(2) Pour electrolytic solution into the battery.
(→p.21 " How to handle the battery and charger")
( "M" Specifications does not require this procedure)
(3) Connect the battery. Firstly, remove cover on the operation side and then
connect the battery with positive terminal and negative terminal in that order.
("M" Specifications does not require this procedure)
(4) If you need to fix the water discharge valve toward the operation side, loosen
the fixing bolt of water discharge valve stopper temporarily and then pull down
the stopper.
(5) If needed, take the below procedure to remove/attach the cover.
1) Put the ring part of fastener in standing position.
2) Rotate the ring with a quarter-turn to the left.
3) Make sure that the fastener is loosened and remove the cover.
There are three fasteners in each cover. To remove the cover, loosen the
rest of fasteners with above procedure.
* Take an opposite procedure to attach the cover.
pull down
1
(7)
2
3