Advertisement
Quick Links
The ENFORCER Wave-to-Open Sensor uses IR technology to request egress from a protected
area or activate a device with the simple wave of a hand. Since no touch is required, this sensor is
suitable for use in hospitals, clinics, labs, cleanrooms (to reduce the risk of contamination),
schools, factories, or offices.
Features:
• Range up to 2" (5cm)
• White plastic single-gang plate
• 3A relay, triggers minimum 0.5 sec or as
long as hand is near the sensor
• Quick connect screw-less terminal block
SD-927PWCQ
Wave-to-Open Sensor
Manual
®
• LED illuminated sensor area for easy
identification.
• Selectable LED colors (turns from red to
green or green to red) to show sensor
activated.
Advertisement
Related Manuals for SECO-LARM ENFORCER SD-927PWCQ
Summary of Contents for SECO-LARM ENFORCER SD-927PWCQ
- Page 1 SD-927PWCQ Wave-to-Open Sensor Manual The ENFORCER Wave-to-Open Sensor uses IR technology to request egress from a protected area or activate a device with the simple wave of a hand. Since no touch is required, this sensor is suitable for use in hospitals, clinics, labs, cleanrooms (to reduce the risk of contamination), schools, factories, or offices.
- Page 2 NOTE: The decal needs at least 24 hrs. to fully dry & bond with the surface. Do not touch or scratch until the decal is fully dry. Decals for the lower part of the plate are provided for Spanish and French only. SECO-LARM U.S.A., Inc.
- Page 3 3. Installation with Electromagnetic Lock and Keypad EAP-5D1Q SK-1011SQ Access Control Power Supply Digital Keypad SECO-LARM Series WAVE TO OPEN Electromagnetic Lock 12VDC Power input (–) ( 12VDC Relay output Power input (–) ( COM NO Tamper Output (N.C.) SECO-LARM U.S.A., Inc.
- Page 4 WARRANTY: This SECO-LARM product is warranted against defects in material and workmanship while used in normal service for one (1) year from the date of sale to the original customer. SECO-LARM’s obligation is limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM. This Warranty is void if...