License Plate Lamp; Replacement Bulbs; Windshield Wiper Blade Replacement - Buick 2007 Terraza Owner's Manual

License Plate Lamp

To replace one of these bulbs, do the following:
1. Remove the two screws holding each of the
license plate lamps to the fascia.
2. Turn and pull the license plate lamp forward
through the fascia opening.
3. Turn the bulb socket counterclockwise and
pull the bulb straight out of the socket.
4. Install the new bulb.
5. Reverse Steps 1 through 3 to reinstall the
license plate lamp.

Replacement Bulbs

Exterior Lamp
Back-up
Front Turn Signal, DRL and
Parking
High-Beam and Low-Beam
Headlamps
License Plate Lamp
Sidemarker
Stoplamp, Taillamp and Turn
Signal
For replacement bulbs not listed here, contact
your dealer.
Windshield Wiper Blade
Replacement
Windshield wiper blades should be inspected for
wear and cracking. See Scheduled Maintenance
on page 509 for more information.
Replacement blades come in different types and
are removed in different ways. For proper type and
length, see Normal Maintenance Replacement
Parts on page 520.
Bulb Number
3057KX
3157NAK
H11
168
194
3057KX
447