Using The Audio Menu - Sony KD-34XBR960 Instructions: TV stand (primary manual) Operating Instructions Manual

Using the Audio Menu

To access the Audio Menu, follow these steps:
1. Display Menu
MENU
To change settings, move the joystick
Press to confirm the selection.
To exit the Menu, press
Selecting Audio
Options
You can also change the
Effect using the button
on the inside panel of the
remote control.
2. Highlight 3. Press to select
v
.
MENU
The Audio Menu includes the following options:
Option Description
Treble Adjust to decrease or increase higher-pitched sounds.
Bass Adjust to decrease or increase lower-pitched sounds.
Balance Adjust to emphasize left or right speaker balance.
Steady Sound Auto
Off
✍
Effect TruSurround
Simulated
Off
MTS Stereo
Enjoy stereo,
bilingual and
Auto SAP
mono programs
Mono
✍
V v B b.
Select to stabilize the volume.
Select to turn off Steady Sound.
The Steady Sound option is not available (it is grayed out)
if the Effect option is set to TruSurround or Simulated. To
use Steady Sound, set Effect to Off.
Select for surround sound (for stereo programs
only).
Adds a surround-like effect to mono programs.
Normal stereo or mono reception.
Select for stereo reception when viewing a
program broadcast in stereo.
Select to automatically switch the TV to second
audio programs when a signal is received. (If
no SAP signal is present, the TV remains in
Stereo mode.)
Select for mono reception. (Use to reduce noise
during weak stereo broadcasts.)
MTS is available only with analog programs.
97