Sony KD-34XBR960 Instructions: TV stand (primary manual) Operating Instructions Manual page 17

Jack
1 VHF/UHF
2 S VIDEO IN 1/3
3 VIDEO IN 1/3/4
VIDEO/L(MONO)
-AUDIO-R
4 MONITOR OUT
5 AUDIO OUT (VAR/FIX)
6 HD/DVD IN 5/6
(1080i/720p/480p/480i)
7 CONTROL S
IN/OUT
8 HDMI
(VIDEO 7 IN)
9 DIGITAL AUDIO OPTICAL
OUTPUT
(DOLBY DIGITAL PCM)
0 CableCARD Slot
qa i.LINK
(2 inputs)
qs Cable
* Dolby and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.
16
Description
RF input that connects to your VHF/UHF antenna or cable box.
Connects to the S VIDEO OUT jack of your VCR or other video equipment that has
S VIDEO. S VIDEO provides better picture quality than either composite video (3)
or VHF/UHF (1) connections.
Connect to the composite A/V output jacks on your VCR or other video
component. A fourth component A/V input jack (VIDEO 2) is located on the front
panel of the TV. This video connection provides better picture quality than the
VHF/UHF (1) connection.
Lets you record the program you are watching to a VCR. When two VCRs are
connected, you can use the TV as a monitor for tape-to-tape editing (not available
with digital channels or with 480i, 480p, 720p, or 1080i when the input is set to
VIDEO 5, 6, or 7).
Connects to the left and right audio input jacks of your audio or video equipment.
You can use these outputs to listen to your TV's audio through your stereo system.
Connect to your DVD player's or digital set-top box's component video (Y, P
and audio (L/R) jacks. Component video provides better picture quality than 1,
2, or 3).
Allows the TV to receive (IN) and send (OUT) remote control signals to other Sony
infrared-controlled audio or video equipment that has the CONTROL S function.
HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-
digital audio/video interface between this TV and any HDMI-equipped
audio/video component, such as a set-top box, DVD player, and A/V receiver.
HDMI supports enhanced, or high-definition video, plus two-channel digital audio.
Connect to the optical audio input of an audio component that is Dolby* Digital and
PCM compatible.
Provides cable subscribers with access to digitally encrypted cable channels —
without the need for a set-top box — that will enable you to receive not only
standard definition but also high definition television. The CableCARD, which is
provided by your cable TV company, is inserted into this slot. After the service is
activated with your cable TV company, the card replaces the need for a separate set-
top box. Check with your cable TV company about CableCARD service details,
limitations, pricing, and availability. For more information, see page 43.
Connects to the i.LINK jack on your i.LINK-compatible device. Provides a secure
digital connection between your TV and your i.LINK-compatible device.
RF input that connects to your cable signal.
, P )
B R