Programming Caption Vision - Sony KD-34XBR960 Instructions: TV stand (primary manual) Operating Instructions Manual

z
Normally, Tilt Correction
and Vertical Correction only
need to be adjusted the first
time you turn on the unit and
after the unit is moved to a
new location.
z
If a CableCARD is
inserted, the i.LINK Standby
Off setting uses the same
amount of power as the
i.LINK Standby On setting.
Programming
Caption Vision
106
Option Description
Tilt Correction
Allows you to correct any tilt of the picture.
Move the joystick
+7 and -7 and press
Vertical Correction
Allows you to make a vertical correction to the picture.
Move the joystick
+5 and -5 and press
Language Select to display all on-screen Menus in your language of
choice.
i.LINK Standby On
Off
Menu Color Enables you to select a specific color for the on-screen
menus.
If you selected the
Program
you can change the following settings:
Basic
Allows you to select basic analog (EIA-608) closed caption
options.
CC1, CC2,
CC3, CC4
Text1,Text2,
Text3,Text4
Advanced
Allows you to select advanced digital (EIA-708) closed
caption options. Select from the available options.
Override Allows you to "force" the close captioning to analog (EIA-
608). This setting is in effect only until you change
channels, inputs, or turn off the TV.
On
Set to
B or b to choose a correction between
.
V or v to choose a correction between
.
Allows the i.LINK signal to pass through
to connected i.LINK devices even when
the TV is turned off. The front panel
i.LINK Standby LED shows orange. The
TV uses more standby power than when
this option is set to Off.
Does not allow the i.LINK signal to pass
through to connected i.LINK devices when
the TV is turned off. The front panel
i.LINK Standby LED shows red. The TV
uses less standby power than when this
option is set to On.
option under
Caption Vision
Displays a printed version of the dialog or
sound effects of a program. (Should be set
to CC1 for most programs.)
Displays network/station information
presented using either half or the whole
screen (if available). For closed captioning,
set to CC1.
or Off.
(see page 105),