Page 1
THANK YOU We appreciate the trust and con dence you have placed in Glacier Bay through the purchase of this kitchen sink. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for...
OBLIGATION OF THE ORIGINAL OWNER No employee, agent, or other person is authorized to provide any warranty on behalf of The Home Depot for a Glacier Bay product that is in addition to or different from the warranty stated above unless the warranty has been previously approved by an authorized representative.
Pre-Installation PLANNING INSTALLATION Compare all the parts to the Hardware Included and Package Contents lists and verify that all the parts are included. Inspect all the parts for damage. If there are missing parts or visible damage to the sink, do not install and contact the Customer Service Team at 1-855-HD-GLACIER.
Undermount-Installation Preparing the cabinet Preparing the countertop Measure the sink apron and the cabinet opening to make sure the NOTICE: It is strongly suggested that you contact a professional sink apron will t into the cabinet opening. If necessary, sand the countertop fabricator when installing the sink as an undermount.
Page 10
Undermount-Installation Installing the sink Installing the countertop Clean the bottom of the countertop and the top ange (or lip) of NOTICE: The front sink apron must be secured to the front of the the sink with denatured alcohol. cabinet by attaching fasteners through the cabinet front and into the Apply a narrow bead of silicone adhesive sealant (not included) support framing.
Page 11
Undermount-Installation Maintenance Installing the drain assembly Place the sink (A) into the installation hole to verify the t. Adjust the cutout if necessary. Install the strainer assembly (C-J) as these steps describe. It is easier to install the strainer assembly (C-J) to the sink (A) before the sink is installed to the cabinet.
Undermount-Installation Maintenance Putting on the accessories (workstation sinks only) For workstation sinks (A), place the cutting board (N), the colander (M) and the roll mat (L) on the sink (A) or countertop directly. Care and Maintenance Do not use abrasive cleaning creams or powders, concentrated caustic soda, formic acid, or anything highly corrosive. For more information on removing dif cult stains, contact customer service at 1-855-HD-GLACIER or visit your local Home Depot store.
Page 13
Questions, problems, missing parts? Before returning to the store, call Glacier Bay Customer Service 8 a.m. – 7 p.m., EST, Monday-Friday, 9 a.m. – 6 p.m., EST, Saturday 1-855-HD-GLACIER HOMEDEPOT.COM/GLACIERBAY Retain this manual for future use.
Need help?
Do you have a question about the ACS3021A1Q and is the answer not in the manual?
Questions and answers