Advertisement
INSPECTION
1. Check the drive shaft spline for wear or damage.
2. Check that there is no water or foreign material in the BJ.
3. Check the spider assembly for roller rotation, wear or corrosion.
4. Check the groove inside the UTJ case for wear or corrosion.
5. Check the dynamic damper for damage or cracks.
DISASSEMBLY
a. Do not disassemble the BJ assembly.
b. The Driveshaft joint uses special grease. Do not subtitute with another type of grease.
c. The Boot band should be replaced with a new one.
1. Remove the TSJ boot band and pull the boot from TSJ outer race.
Be careful not to damage it.
Advertisement
