Advertisement
5. Remove the fuel inlet hose(A) from the delivery pipe.
6. Disconnect the engine wiring harness connectors.
(1) Disconnect the No.1/No.2 knock sensor connectors(A,B), the oil pressure switch connector(C), the ignition coil
harness(D) and the No.1 VIS(Variable Induction System) connector(E).
(2) Disconnect the bank 1 front/rear O2 sensor connectors(A).
(3) Disconnect the injection connectors(A,B,C), the ground lines(D), the condensor connector(E) and the Ignition
coil connectors(F).
Advertisement
