Headlamp High/Low-Beam Changer - Buick 2005 LeSabre Owner's Manual

You may also have an arrow in the outside mirror that
flashes when the turn signal is used. See Outside Power
Mirrors on page 2-35 for more information.
Raise or lower the lever until the arrow starts to flash to
signal a lane change. Hold it there until the lane
change is complete.
If the arrows flash very fast as you signal a turn or a
lane change, a signal bulb may be burned out and other
drivers will not see your turn signal. If a bulb is burned
out, replace it to help avoid an accident.
If the arrows do not go on at all when you signal a turn,
check the fuse. See Fuses and Circuit Breakers on
page 5-88.
Turn Signal On Chime
If your turn signal is left on for more than 0.8 miles
(1.3 km), a chime will sound at each flash of the turn
signal. To turn off the chime, move the turn signal lever
to the off position.
3-8

Headlamp High/Low-Beam Changer

To change the headlamps from low beam to high
beam or high beam to low beam, pull the turn signal
lever toward you and release it.
If your vehicle is equipped with the Head-Up Display
(HUD), this symbol will also appear in the display area to
indicate the high beams are on. See Head-Up Display
(HUD) on page 3-20 for more information.
Flash-to-Pass
This feature lets you use the high-beam headlamps to
signal the driver in front of you that you want to pass. It
works even if your headlamps are off.
Pull the turn signal lever toward you briefly to
flash-to-pass.
If the headlamps are off or on low beam, the high-beam
headlamps will turn on. They will stay on as long as
you hold the lever toward you and the high-beam
indicator on the instrument panel cluster will come on.
While the high beams are
on, this light located on the
instrument panel cluster
will also be on.