Names And Functions Of Remote Control - Hitachi RAS-E35YCAB Manual

NAMES AND FUNCTIONS OF REMOTE CONTROL

This controls the operation function and timer setting of the room air conditioner. The range of control
is about 7 meters. lf indoor lighting is controlled electronically, the range of control may be shorter.
MODE selector Button
Use this button to select the
operating mode. Every time
you press this button, the
mode will change from
(DEHUMIDIFY)
(COOL) and (FAN)
cyclically.
ECO Button
Use this button to set the
ECO mode.
( Page 1 3)
TIMER OFF Button
Select the turn OFF time.
( Page 1 0 )
TIMER ON Button
Select the turn ON time.
( Page 1 0 )
SLEEP TIMER Button
Use this button to set the
sleep timer.
( Page 1 5 )
AUTO CLEAN Button
press ECO button and F.Wash button
to set the AUTO CLEAN mode.
( Page 1 4)
Precautions for Use
• Do not put the remote control under direct sunlight and high temperature.
• Do not drop it on the fl oor, and protect it from water.
• If you press the MODE selector button during operation, the compressor may stop for about 3 minutes
for protection before you can start it again.
Signal Transmission
Right/Left
F.Wash
Sleep Silent
- 7 -
Transmission Sign
The transmission sign blinks
when a signal has been send.
ON/OFF Button
Press this button to start
operation.
Press it again to stop operation.
TEMPERATURE Button
Room temperature setting.
Value will change quicker when
keep pressing.
FAN SPEED Button
Select the fan speed for cooling
mode.
( Page 1 0 )
UP/DOWN (Horizontal)
Button
Control the angle of the
horizontal air deflector.
( Page 1 7)
RIGHT/LEFT (Vertical)
Button
Controls the angle of the
vertical air de ector.
( Page 1 7)
SILENT Button
Use this button to set the
SILENT mode.
( Page 1 6)
POWERFUL Button
Press this button to start
powerful operation.
(
Page 11)
FROST WASH/CLEAN
Button
( Page 1 2 )