Advertisement
JA-151P-WW Wireless PIR motion detector
Technical specifications
Power
2x AA (LR6) / 1.5 V / 2400 mAh alkaline batteries
Typical battery lifetime
(the longest lifetime is achieved in smartwatch mode)
Low battery voltage
Quiescent current consumption
Maximum current consumption
Communication frequency
Maximum radio-frequency power (ERP)
Communication range
Recommended installation height
Detection angle / detection range
Dimensions
Weight (without batteries)
Classification
Operational environment
Operating temperature range
Average operating humidity
Certification body
Trezor Test s.r.o. (no. 3025), Telefication B.V.
Complies with
EN 50131-1, EN 50131-2-2, EN 50131-5-3,
EN 50131-6, ETSI EN 300 220-1,-2, EN 50130-4,
EN 55032, EN 62368-1, EN 50581, T 031
Can be operated according to
Recommended screw
2x
JABLOTRON ALARMS a.s. hereby declares that the JA-151P-
WW product is in a compliance with the relevant Union
harmonisation
legislation:
2014/35/EU, 2014/30/EU, 2011/65/EU if it is used as intended.
The original of the conformity assessment can be found
at www.jablotron.com - Section Downloads.
Note: Although this product does not contain any harmful
materials we suggest you return the product to the dealer or
directly to the producer after use.
JA-151P-WW
Please note: Batteries are not included
approx. 2 years
868.1 MHz, JABLOTRON protocol
approx. 300 m (open area)
2.5 m above the floor
90 °/12 m
62 x 130 x 38 mm
Security grade 2 / Environmental class II
(according to EN 50131-1)
Indoor general
-10 °C to +40 °C
75 % RH, without condensation
ERC/REC 70-03
ø 3,5 x 40 mm (countersunk head)
Directives
No:
2014/53/EU,
< 2,2 V
25 μA
50 mA
13 mW
139 g
2 / 2
MMN51207
Advertisement
