Ec Declaration Of Conformity - Walther Systemtechnik TBV-H-01 Operating Manual

Operating Manual Table-top Greasing Device TBV-H-0x-xx
Rev. 1.5

EC Declaration of Conformity

in accordance with the EC Machinery Directive 2006/42/EC of May 17
We herewith declare that the design and construction of the machine marketed by us as described
below corresponds with the safety requirements of the EC Directive 2006/42/EC. If the machine is
modified without our consent, this declaration loses its validity.
Manufacturer
Walther Systemtechnik GmbH
Hockenheimer Straße 3
D- 76726 Germersheim
Description
Table-top Greasing Device
Article-No.:
We declare that the product is in accordance with the following relevant regulations:
EMC Directive 2014/30/EU, dated 26 February 2014
The following harmonized European Standards have been applied:
DIN EN ISO 12100
Other applied technical standards and specifications:
Authorized representative for the technical documentations:
Stefan Hirl, Hockenheimer Straße 3, D- 76726 Germersheim
Germersheim, 18 April 2016
(Place, Date)
TBV-H-01(H), TBV-H-02(H), TBV-H-03(H), TBV-H-04(H)
TBV-H-01-SW(H), TBV-H-02-SW(H), TBV-H-03-SW(H),
TBV-H-04-SW(H)
TBV-H-01-S(H), TBV-H-02-S(H)
TBV-H-01-S-SW(H), TBV-H-02-S-SW(H)
Safety of machinery; basic concepts, general
principles for design – Risk Assessment and Risk
Reduction (ISO 12100:2000)
Walther Systemtechnik GmbH – D 76726 Germersheim
Telefon: +49 (0)7274-7022-0 Telefax: +49 (0)7274-7022-91
http://www.walther-2000.de – info@walther-2000.de
th
, 2006, Annex II A
(Stefan Hirl, Management)
Page 4 of 35