Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Walther Systemtechnik WMV-03-K-14-14-01
Summary of Contents for Walther Systemtechnik WMV-03-K-14-14-01
- Page 1 Walther Material Distributor Installation Manual Version Rev -...
- Page 2 Walther Systemtechnik GmbH Hockenheimer Straße 3 D-76726 Germersheim Phone: +49 (0)7274-7022-0 Fax: +49 (0)7274-7022-91 info@walther-systemtechnik.com http://www.walther-systemtechnik.com Installation Manual WVM-BA-10 Page 2 of 19...
-
Page 3: Table Of Contents
Transport and Damages in Transport ....................10 Location of Set-up ..........................10 Description of Product ....................11 Design and Construction ........................11 4.1.1 Material Distributor (WMV-03-K-14-14-01) ....................11 4.1.2 Material Distributor (WMV-04-F-38-14-01) ....................11 Performance Characteristics ......................12 Start of Operation ......................13 Installing the Module Body ....................... -
Page 4: Introduction
Systemtechnik GmbH has a guarantee of 12 months under normal European operating conditions on its own parts (wear-and-tear parts are excluded). This guarantee can only be granted by Walther Systemtechnik GmbH, if: • the user has thorough knowledge of the contents of this operating manual;... -
Page 5: Copyright
1 Introduction Copyright We reserve the copyright for this operating manual. This operating manual is exclusively designated for the operator and his personnel. Any copying – also only in part – or processing, or distribution or other use is strictly prohibited. Warnings All warnings in this Operating Manual are indicated with special danger symbols. -
Page 6: Ordering Key
Inlet Flange G1/4” G3/8” G1/2” Outlet Flange G1/4” G3/8” Index Index 01 Example for Ordering Key: WMV-03-K-14-38-01 Standard Types Article Number Ordering Key 50007906 WMV-03-K-14-14-01 979667 50007884 WMV-04-F-38-14-01 979818.00 50007882 WMV-04-F-12-38-01 979816.00 50007871 WMV-08-F-12-38-01 Installation Manual WMV-BA-10 Page 6 of 19... -
Page 7: Safety Instructions
No changes will be made at the device. The customer carries the sole responsibility for consequences resulting from failure to observe this guideline. Please contact Walther Systemtechnik GmbH for any desired modifications. Make sure that the device is always in a safe operational condition. Checks for proper function or damages have to be performed by specialists on a regular basis. -
Page 8: Correct Use
• Operating the WMV with insufficient knowledge of operation and maintenance • Making changes, extensions or alterations on the WMV that may hamper its safety without the prior consent of Walther Systemtechnik GmbH • Using the device in explosive areas, according to directive 2014/34/EU. -
Page 9: Required Qualification Of Personnel And Protective Equipment
2 Safety Instructions Required Qualification of Personnel and Protective Equipment CAUTION Danger from incorrect use • The WMV can become a hazard if operated by untrained personnel or not used for the designated purpose. • In all phases of life, work will only be performed by trained and specialized personnel. -
Page 10: Transport
3 Transport Transport Packaging The Material Distributor will be prepared by Walther Systemtechnik GmbH for a transport to the first destination. The type of packaging depends on the individual mode of shipping. If not separately contracted, the packaging is in accordance with the rules and regulations of Walther Systemtechnik GmbH. -
Page 11: Description Of Product
Processing aggressive media such as acids, alkaline solutions, detergents, chemicals, abrasive media etc. can cause malfunctions, material damages or even the destruction of individual parts/the device. Design and Construction 4.1.1 Material Distributor (WMV-03-K-14-14-01) Material inlets and outlets Fastening borings Basic body Figure 2 –... -
Page 12: Performance Characteristics
• Equipped with a connection for an optional manometer • Cost-attractive alternative for T-pieces and pipe screw-joints The below tables give you an overview of the allowed operating conditions, respectively the limits of use. Material Distributor (WMV-03-K-14-14-01) Feature Min. Type Max. -
Page 13: Start Of Operation
5 Start of Operation Start of Operation WARNING Hazard from contact or inhalation of toxic fluids, gases, mist, vapors or dust Strictly follow the safety data sheets of the employed media. The operator company is responsible for providing the required personal protective equipment which has to be worn. -
Page 14: Fastening
5 Start of Operation Fastening 5.2.1 Material Distributor (WMV-03-K-14-14-01) Fastening with M6 screws Inside view Figure 5 – Fastening options Installation Manual WMV-BA-10 Page 14 of 19... -
Page 15: Material Distributor (Wmv-04-F-38-14-01)
5 Start of Operation 5.2.2 Material Distributor (WMV-04-F-38-14-01) Fastening with M6 screws Figure 6 – Fastening options Installation Manual WMV-BA-10 Page 15 of 19... -
Page 16: Troubleshooting
5 Start of Operation Troubleshooting IMPORTANT First check that all supply lines are properly connected and functioning. In case of serious problems which you cannot resolve, please contact the Walther Systemtechnik GmbH customer service. Customer Service / Support Walther Systemtechnik GmbH Hockenheimer Straße 3... -
Page 17: Taking Out Of Service
6 Taking out of Service Taking out of Service CAUTION Please follow all instructions for operation and maintenance! Short Interruption For short interruptions, i.e. overnight or weekends, turn off the complete system. Long-term Interruption If the Walther Material Distributor will not be used for a longer period of time, take the following steps: •... -
Page 18: Accessories
7 Accessories Accessories IMPORTANT Only use original spare parts from the manufacturer! Wrong or defective spare parts from other manufacturers can damage the device. If other than original spare parts of the manufacturer will be used, all obligations from the manufacturer or his sales partners, such as guarantees, service contracts etc. - Page 19 WST-Key: WMV-BA-10 Article Number: 50014439...