HAMPTON BAY ANSELMO D6051-7PC Manual page 10

Table Assembly (continued)
Connecting the table brace to leg
3
connectors and table top
□
Attach the table brace (K) to the leg connector (J) and table
rim (G) using the bolts (BB) and washers (EE).
□
Tighten all bolts (BB) using the hex wrench (HH).
NOTE: Tighten each bolt a few turns at a time, alternating
between bolts in a cross-corner pattern (X). This ensures that
the table is level by placing equal amounts of pressure on all
bolt joints. Do not overtighten the bolts.
BB
EE
J
K
G
BB
EE
Placing the table glass and stone
4
top on the table rim
□
Turn the table over so it is right side up.
□
Carefully place the table glass (L) into the table rim (G).
□
Carefully place the stone top (M) into the table rim (G).
10
M
L
G