Matco Tools MDMAXBOX User Manual page 7

Select your type of business and level of programming
8.
experience, then select the OEMs you are planning to
support .
Click Continue .
For final check of the interface, unplug the USB cable for the
9a.
MDMaxBox
Then plug the USB cable for the
9b.
into your PC, and click Ok .
Permission is granted to copy any or all portions of this manual, provided that such copies are for use with Drew Technologies, Inc. products
and that "© 2020 Drew Technologies, Inc.", (herein referred to as "DrewTech"), remains on all copies. The accompanying software, provided for
use with the DrewTech product, is also copyrighted. Permission is granted to copy this software for back-up purposes only.
* Drew Technologies is a part of the Opus IVS family.
device from your PC, and click Ok .
MDMaxBox
User Guide
device back
7 of 18