Introduction; Getting To Know The Mdmaxbox; Led Status Lights - Matco Tools MDMAXBOX User Manual

Introduction

Thank you for choosing
allow you to re-flash/program modern vehicle controllers specified
by the OEM as well as perform dealer level diagnostics with OEM
applications . More information for each OEM can also be found in
the J2534 Toolbox 3
setup, features, and common questions regarding the
device and is available at
Getting to Know the
Power
Protocol
Vehicle Cable

LED Status Lights

POWER
PROTOCOL
CONNECTION
VEHICLE
CABLE
USB
CABLE
Permission is granted to copy any or all portions of this manual, provided that such copies are for use with Drew Technologies, Inc. products
and that "© 2020 Drew Technologies, Inc.", (herein referred to as "DrewTech"), remains on all copies. The accompanying software, provided for
use with the DrewTech product, is also copyrighted. Permission is granted to copy this software for back-up purposes only.
* Drew Technologies is a part of the Opus IVS family.
Drew Technologies
application . This user manual covers the initial
®
drewtech .com/downloads/MatcoTools .html
USB Cable
Auxiliary Programming
Voltage Connection
RED
BLINKING SOLID
Firmware error: Call
–
DrewTech Support
– –
Cable not connected
–
or cable error
Installation Issue:
–
Call DrewTech Support
!
MDMaxBox
*
MDMaxBox
USB
Cable Port
Vehicle Cable
Connection
GREEN
BLINKING
Device startup in
progress
Connected and
communicating with
vehicle
–
–
User Guide
will
MDMaxBox
.
SOLID
Device is functioning
Connected to vehicle
Cable OK /
Vehicle power
(Communication)
Connected to PC
3 of 18