Installation & Device Activation - Matco Tools MDMAXBOX User Manual

Installation & Device Activation
Windows 10 users:
1 . It is important that you connect the device to your PC first .
2 . Leave your device connected to your PC and proceed to
Click this link to go to the
1.
Locate and click on the
2.
located in
Run the installation once the software has downloaded to
3.
your PC . Upon encountering this screen, read the end-user
license agreement . Check the box to accept the license
agreement terms and then click Install .
Permission is granted to copy any or all portions of this manual, provided that such copies are for use with Drew Technologies, Inc. products
and that "© 2020 Drew Technologies, Inc.", (herein referred to as "DrewTech"), remains on all copies. The accompanying software, provided for
use with the DrewTech product, is also copyrighted. Permission is granted to copy this software for back-up purposes only.
* Drew Technologies is a part of the Opus IVS family.
a . Initial low-level drivers will be automatically downloaded and
installed as Windows Update recognizes your device .
the Installation & Device Activation process .
DrewTech .com/downloads/MatcoTools .html
Device Drivers .
Downloads
DrewTech
Set-up
MDMaxBox
User Guide
Step 1 of
page:
link
4 of 18