Sony RM-TP2 Operating Instructions Manual page 11

4
Touch IR SETUP in the pull-down
menu.
The IR SETUP: CATEGORY screen
appears.
5
Select the component category ("VCR"
for example).
To display other items, use the jog dial, or
touch v or V to scroll through the list. The
IR SETUP: MAKER CODE screen appears.
6
Select the maker and the command
mode for the component ("Sony VTR1"
for example).
See "Maker compatibility list" on page 37.
The component selected in steps 5 and 6
will be registered at the remote (component)
selected in step 2, and the screen for the
selected category appears. The IR setting is
displayed at the bottom of the screen.
A long beep sound is emitted to indicate
that registration was successful. Operation
is now possible from the RM SELECT
screen.
To stop registration at any time
Touch EXIT or CANCEL during any step.
Notes
• Depending on the maker, certain remote codes may
not exist and cannot be operated with the keys
(icons) on the screen. These keys are dimmed.
• When registering components made by certain
manufacturers, some commands may not function
even though they are displayed.
• Depending on the model or the model year, you
cannot operate the component even it is listed in the
"Maker compatibility list". In this case, you can use
the Learning function to program the commands of
the remote supplied with the component (page 26).
• To operate the amplifier in the 2nd room, select
"AMP" in the IR SETUP: CATEGORY screen and
select "Sony MULTI ROOM1" in the IR SETUP:
MAKER CODE screen. This is initially registered
in the RM SELECT screen (2/2) as "2ND ZONE".
• To operate the amplifier in the 3rd room, select
"AMP" in the IR SETUP: CATEGORY screen and
select "Sony MULTI ROOM2" in the IR SETUP:
MAKER CODE screen. This is initially registered
in the RM SELECT screen (2/2) as "3RD ZONE".
The following tables explain the component
categories for Sony amplifier/receiver (AMP)
and tuner (TUNER).
AMP
Sony AV Select this when the command mode
SYSTEM 1 of the amplifier/receiver is AV1 (AV
SYSTEM1).
Select this when the command mode
Sony AV
SYSTEM 2 of the amplifier/receiver is AV2 (AV
SYSTEM2).
(Default setting of AMP in the RM
SELECT screen.)
Select this when the amplifier/receiver
Sony AV
SYSTEM 3 operates under AV SYSTEM3. (Home
theater system, etc.)
Select this when you use the Sony
Sony AMP
pure amplifier.
Sony AV Select this when you use the Sony
pre amplifier. (TA-E9000ES, etc.)
PRE AMP
Select this when you use the former
Sony AV
MASTER Sony AV amplifier.
Sony MULTI Select this when you use the 2nd
zone function of the AV amplifier/
ROOM1
receiver.
(Initially registered in the RM
SELECT screen (2/2).)
Sony MULTI Select this when you use the 3rd
zone function of the AV amplifier/
ROOM2
receiver.
(Initially registered in the RM
SELECT screen (2/2).)
continued
GB
11