Table of Contents
Advertisement
English
HEAVY‑DUTY SDS PLUS® ROTARY HAMMERDRILL
DCH172
Congratulations!
You have chosen a D
WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
Battery type
Maximum power output
No‑load speed
No‑load beats per min
Single impact energy (EPTA 05/2009)
Optimum drilling range
Maximum diamter concrete
Tool holder
Weight (without battery pack)
Noise values and vibration values (triax vector sum) according to EN60745‑2‑6:
L
(emission sound pressure level)
PA
L
(sound power level)
WA
K (uncertainty for the given sound level)
Drilling into concrete
Vibration emission value a
h, HD
Uncertainty K =
Drilling into metal
Vibration emission value a
h, D
Uncertainty K =
Screwdriving
Vibration emission value =
Uncertainty K =
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.
WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total working period.
4
WALT one of the
e
V
DC
W
min‑1
bpm
J
mm
mm
kg
dB(A)
dB(A)
dB(A)
=
m/s
2
m/s
2
=
m/s
2
m/s
2
m/s
2
m/s
2
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm
(relevant for vibration), organisation of work patterns.
EC‑Declaration of Conformity
Machinery Directive
DCH172
18
1
Li‑Ion
Heavy‑Duty Cordless Rotary Hammerdrill
650
DCH172
0–1060
D
WALT declares that these products described under
e
4980
Technical Data are in compliance with:
1.4
2006/42/EC, EN60745‑1:2009+A11:2010, EN60745‑2‑6:2010.
4–10
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
16
the following address or refer to the back of the manual.
SDS plus®
The undersigned is responsible for compilation of the technical
1.8
file and makes this declaration on behalf of D
87
98
4
Markus Rompel
Vice‑President Engineering, PTE‑Europe
D
WALT, Richard‑Klinger‑Straße 11,
e
8.8
65510, Idstein, Germany
22.01.2021
1.5
a
WARNING: To reduce the risk of injury, read the
instruction manual.
≤ 2.5
1.5
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
≤ 2.5
signal word. Please read the manual and pay attention to
1.5
these symbols.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
Denotes risk of electric shock.
Denotes risk of fire.
WALT at
e
WALT.
e
Advertisement
Table of Contents
