Function Introduction - UNI-T UDP3303C User Manual

Function Introduction

1. Voltage / Current Setting and Output

Voltage setting: Press CH1 button, the cursor will flash on the CH1 voltage position, press
the voltage knob to move the cursor and rotate the knob to adjust the voltage value;

Current setting: Press CH1 again, the cursor will flash on the CH1 current position, press the
current knob to move the cursor and rotate the knob to adjust the current value.

Press CH2 to set the CH2 voltage and current values with the same method above.

Press the OUTPUT button to enable CH1, CH2 and CH3 outputs after voltage and current
setting.

With the shutdown memory function, the last set value can be automatically restored when
the device is started next time.
The operation and display interfaces are as follows: