System Management - Sony PRS-T1 User Guide (Printable Version) User Manual

Reader™ User Guide
Getting started
Basic Operations
Adding/Getting Content
Browsing Content Lists
Reading
Organizing
Other Applications
Settings
Other Information
Contents list

System Management

Setting Description
Sets a 4-digit PIN for the Reader to prevent unauthorized use.
To set [Device Lock] to [On], input your 4-digit PIN
again tap [OK]. When [Device Lock] is set to [On], you must unlock the
Reader with the 4-digit PIN when waking up the Reader from sleep mode, or
when turning on the power.
[Device
To set [Device Lock] to [Off], input your 4-digit PIN and tap [Continue].
Lock]
Note
Sony recommends that you make a note of your password and keep it in a
safe place separate from the Reader.
If you forget your password, contact Sony Customer Support. Note that in
unlocking your device, all content on it will be erased.
Sets standby screen preferences.
[Type of Image]: You can select whether to display the cover of the last read
book or pictures from the [Pictures] application. When you select [Selected
[Standby
Pictures], continue by tapping [Select Pictures]
Screen]
pictures you want to display
[Show Message]: You can select whether to display a message about waking up
the Reader from sleep mode on the standby screen.
[Download Sets the destination for content downloaded from Reader Store or files
Destination] downloaded from the browser. Select between [Internal Memory] and [SD Card].
Copyright 2011 Sony Corporation
Top page > Settings > Changing the Settings > System Management
tap [Done].
Search
Search Print
tap [Continue] to enter it
tap to add a check next to the
Go to page top