Advertisement
③ Connect the connector of the Front Panel of the Contorl Panel Extension Cord to the connector of the
CONTROLLER (Fig. 5).
Attach the Front Panel of the Control Panel Extension Cord to CONTROLLER by Mounting Screw of the
Control Panel (Fig .6).
④ Connect the connector of the Control Panel Extension Cord to the connector of the Conrol Panel (Fig. 7).
⑤ Fasten the Control Panel for CONTROLLER to your orderd box or Control Panel Box (Option ) by using the
Mounting Screw (4pcs : Standard Accessories). Turn Control power ON and verify the CONTROLLER is
operating correctly.
3 . DISPOSAL OF THIS PRODUCTS
When disposal of E4000-PEX4 is necessary, follow the instructions from your local government agency for proper
disposal of electrical components .
Front Panel
Connector
Fig. 5
Fig. 7
Fig. 8
Control Panel
Front Panel
Front Panel
Fig. 6
7
Advertisement
