2. Turn the vertical aiming screw (C) until the level
bubble (D) is lined up with zero.
1. Turn the horizontal
aiming screw (A)
until the
indicator (B) is
lined up with zero.
Front Turn Signal
The front turn signal bulbs can be accessed by removing
the headlamp assembly as described in the previous bulb
replacement procedure.
Remove the old bulb by pulling it straight out of the
socket. Replace the bulb and turn the bulb assembly
back into place.
Once the headlamp
assembly has been removed,
reach down from the top of
the vehicle and, while
pressing the lock tab on the
socket, turn the socket
-
one
quarter of a turn and
pull it out.
6-39