Getting Started - ZERO-X ZX-G1 User Manual

3.0
CAUTION: Please ensure your smartphone is
NOTE: Please ensure to extend arm.
6

GETTING STARTED

Make sure your smartphone and ZX-G1
are fully charged and you have the App
installed and running (see QR code on
page 14). You might need to manually
connect to Bluetooth.
attached to the ZX-G1 before you
turn the gimbal on.
UNFOLD THE ZX-G1
To operate the ZX-G1, you will need to
unclip the arm. To do this, hold the
handle with one hand as shown. Rotate
the gimbal arm by 180 degrees (again, as
shown in the diagram). It is normal for the
arm to be stiff during first use. When you
hear a click, this means the gimbal is
steady.
If your smartphone is unbalanced, you can
use the counterweight to balance it.