Download
Share
Print this page
Newtech Vista Series Warranty, Installation Instructions & Product Care Manual
  1. Manuals
  2. Brands
  3. Newtech Manuals
  4. Indoor Furnishing
  5. Vista Series
  6. Warranty, installation instructions & product care manual

Newtech Vista Series Warranty, Installation Instructions & Product Care Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
BATHROOMWARE DESIGN
Warranty, Installation Instructions
& Product Care Manual
Note: The information in this manual applies to the Vista Range products manufactured in NZ.
IMPORTANT
INNOVATION
Thank you for purchasing one of our products from the Vista Range.
NEWTECH RECOMMENDS THAT A QUALIFIED TRADESPERSON INSTALL
THIS PRODUCT AND THAT IT IS INSTALLED TO A PROFESSIONAL
STANDARD. This product carries a full warranty against faulty workmanship
and materials. Please inspect for damage before installation. It is the
responsibility of the installer to make any adjustments to doors/drawers
after installation if required.
NZ

Advertisement

loading
Need help?

Need help?

Do you have a question about the Vista Series and is the answer not in the manual?

Questions and answers

Related Manuals for Newtech Vista Series

Summary of Contents for Newtech Vista Series

  • Page 1 Note: The information in this manual applies to the Vista Range products manufactured in NZ. Thank you for purchasing one of our products from the Vista Range. NEWTECH RECOMMENDS THAT A QUALIFIED TRADESPERSON INSTALL THIS PRODUCT AND THAT IT IS INSTALLED TO A PROFESSIONAL IMPORTANT STANDARD.
  • Page 2 Preparation Newtech recommends that a qualified trades person install this product and that it is installed to a professional standard. This product carries a full warranty against faulty workmanship and materials. Please inspect for damage before installation. It is the responsibility of the installer to make any adjustments to doors/drawers after installation if required.
  • Page 3 Vanity Unit Installation PREPARE THE CABINET TAP HOLE Remove doors & drawers and drill holes for plumbing in the back panel and/or base of Our Compac basin & StoneCast Stab tops requires a tap hole to be drilled . We the cabinet with an appropriate sized hole saw.
  • Page 4 Vanity Unit Installation Continued... FITTING THE WASTE FIXING THE BASIN When installing a waste, be wary not to overthighten, as doing so can cause the Position the top so that it has an equal amount of overhang on each side and use a ceramic to crack.

  • Page 5: Mirror Adjustment

    Mirror Units & Tower Stations TOWER STATION INSTALLATION Securely fasten cabinet to the wall through the back. Align cabinet with nogs or studs. We recommend using a minimum of two fixings at both the top and bottom of the • Remove all doors & drawers. cabinet.
  • Page 6 Hinge Adjustments Fast assembly concealed hinge HINGE REMOVAL HINGE OVERLAY ADJUSTMENT  Intermat Removal Overlay adjustment  Installation notes Overlay adjustment Depth adjustment Installation Removal Oblong hole height adjustment Ecce To remove the door hinge lift the catch at back of hinge (1), lift body off hinge plate (2) To adjust the door horizontally, using a screwdriver (as pictured) turning clockwise or and slide body of hinge forward (3).
  • Page 7 Tech Atira double walled drawer system allation, adjustment, removal Drawer Runner Adjustments ± 2 ø 3,5 x 16 ± 1,5 ing Quadro drawer runner Installing drawer REMOVING DRAWER INSERTING DRAWERS Removing drawer usting front panel, pot-and-pan drawer with railing 6 ø 6,3 x 14 ≥...

  • Page 8: Troubleshooting

    I have noticed damage on my product - No - please contact the merchant you purchased it should I install it? through. I can’t find dimensions Find all our cabinet specifications at: www.newtech.co.nz www.hettich.com www.hettich.com Technik für Mö & specifications for my vanity unit? www.hettich.com...

  • Page 9: Product Care

    Product Care Newtech products are produced from materials that are well suited to the bathroom. Our vanities are designed to be water resistant, not water proof. It is important that your bathroom is adequately ventilated to eliminate moisture build up. High humidity will lead to permanent dampness and mould resulting in a deterioration of the materials in your bathroom.
  • Page 10 INSTALLERS Newtech recommends that a qualified tradesperson install this product and that it is installed to a professional standard. Please inspect for damage before installation. It is the responsibility of the installer to make any adjustments to cabinetry doors and drawers after installation if required.

  • Page 11: How To Make A Claim

    HOW TO MAKE A CLAIM Please contact the merchant the product/s were purchased through and they will be able to lodge a claim with Newtech on your behalf. Once we receive the claim we will review it and may contact you for further information.
  • Page 12 Head Office: Follow us on 281 Heads Road, Wanganui sales@newtech.co.nz Featured on 06 349 0194 or 0800 728 662 Auckland Concept Showroom: 525 Great South Road, Penrose, Auckland Phone: 09 930 6200 Email: aucklandshowroom@newtech.co.nz newtech.co.nz ...