Page 1
LASER DISTANCE METER USER MANUAl Version: MD50/70 Tavool Laser Distance Meter ----------------------------------------- ------------------------------------- CUSTOMER SERVICE: service@tavool.com If any problem, question or concern, please feel free to contact us via email, we will provide you the best solution according to your issue.
Welcome___________________________________________ Thank you for your choice on our laser distance meter. PLEASE READ THIS INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE, otherwise it may result in hazardous laser radiation and electric shock. IMPORTANT SAFTY PRECATIONS 1. This product is a class II laser product. Please DO NOT stare into beam at any time when operating this product! 2.
Page 3
√ Measuring Reference √ Silence Function Historical Data Review 20Groups √ Error Code √ Battery Power Indication Laser Auto Switch of Instrument Auto Switch off 180s Measuring Range 50m: 0.05m-50m 70m: 0.05m-70m Measuring Accuracy ± 2.0mm Measuring Unit m,ft,in Area Unit m²...
OPERATION 1.Battery Installation: According to figures, remove battery compartment lid and insert 2*AAA batteries (alkaline). *Attention 1. Please do not mix new and old batteries 2. Please replace batteries when the symbol flashes permanently in the display 3. Please remove the batteries before any long period of non-use 4.
Page 6
time press to close the laser point, indication as shown as figure B. Short-time press again to open laser point, indication as shown as figure C. 3.Change Reference Edge Default reference edge is the bottom of meter, indication is shown as figure D. Long-time press to change the measuring reference to the top of meter, indication as shown as figure E.
Page 7
5.Change Measurement Mode ◆ Default setting of measurement is Single Measurement Mode, indication is shown as figure I. Short-time press to switch Area Measurement Mode, indication is shown as figure J. ◆ Short-time press again to switch Volume Measurement Mode, indication is shown as figure K.
5.Switch off The equipment can be switched off at any time by long-time press MEASUREMENT MODE 1.Single measurement In the Single Measurement Mode, aim the laser onto target. Short-time press . The measuring result will be displayed immediately shown as figure O. 2.
Page 9
4. Volume Measurement In the Volume Measurement Mode, aim the laser onto target. Short-time press to measure three lengths of the dimensional target orderly. The volume calculated value will be displayed immediately shown as figure R. (Note: the length value of third side do not display at screen, because the screen can display three lines only.) 5.
Page 10
7.Historical Data Review and Delete Press the button for 5 times into the historical data reading. Short-time press to view the previous measurement data. Short-time press to delete the measurement one by one. Historical Data range: 0-19. The screen shown as figure U. Figure U 8.
USING TIPS 1.Power Indication When the battery power indication as shown as figure X, it means you need to change the battery. 2. Silence Function At any state, long-time press to switch on or switch off the Buzzer. 3.ERROR CODE Questions You May Encounter While Using 1、Q: Will it work for outdoor? A: Yes, but it is not recommended in direct sunlight if it is too bright outdoor because it is hard to...
Tavool laser distance meter is covered by the manufacturer’s ONE YEAR WARRANTY from date of purchase. If any Tavool laser distance meter ever fails for any reason, please contact us by email and Tavool will provide you the best solution(refund or replacement) according to your issue.