Buick 1994 Skylark Owner's Manual page 98

The wipers will stop after one cycle. If you want more
Windshield Washer
cvcles, hold the lever down to "MIST"-longer.
. I
.,
~ ~
~.
CI
~ The top
of
the wiper lever has the word "WASH" on it.
For steady wiping at 10.w speed, move the lever to the To spray washer fluid on the windshield, pull the lever
"LOW" position. For high speed wiping; move the lever toward you,
further up to "HIGH." To stop the wipers, move the
lever to "OFF." If you have the standard wipers, the wipers will keep
going in "LO" until you turn the wiper control to "OFF."
If you have the Low Speed Delay option, the wipers will
You can set the wiper speed for a long or short delay
clear the window and then either stop or return to your
between wipes. This can be very useful in light rain
or
preset speed.
Low Speed Delay Wipers (Option)
Snow. Move the lever to DELAY then, tWfl the band to ~ r i ~ i ~ ~ withoat washer fluid can be dangerous. A bad
choose the amount of delay..
mud splash can block your vision. You could hit another
Remember that damaged wiger'blades may prevent you
vehicle or go off the road. Check your washer fluid
level
from seeing well enough in'a storm to drive safely. To
often.
avoid damage, be sure to clear ice and snow from the
wiper blades before using them. If they're frozen to the
windshield, carefully loosen or thaw them. If your
blades become damaged, get new blades or blade
inserts.
Heavy snow or ice can overload your wipers.
A circuit
breaker will stop them until the motor cools. Clear away
snow or ice to prevent an overload.
. ,
. I
7 ' ) :
A , 4
96