Buick 1994 Skylark Owner's Manual page 103

1. Use the accelerator pedal to get to the higher speed.
2. Push the button at the end of the lever, then release
the button and the accelerator pedal. You'll now
cruise at the higher speed.
Here's the second way to go to a higher speed:
1. Move the Cruise switch from "ON' to "RES/ACC"
Hold it there until you get up to the speed you want,
and then release the switch.
2.
To
increase your speed in very small amounts, move
the switch to "RES/ACC" for less than half a second
and then release it. Each time you do this, your
vehicle will go about 1 mph (1.6 km/h) faster.
To Reduce Speed While Using Cruise
Control
There are two ways to reduce your speed while using
cruise control:
1
AI