Advertisement
Assembly
OR
1.
Fill container with desired
contents. Screw on the
blade assembly until you
have a tight seal.
Blend & Enjoy
POWER NUTRI™ CUP,
SKIP STEP 2.
1.
Select any program
If using the Power
to begin blending.
Nutri™ Bowl, twist the
Power Paddle anti-
clockwise continuously
while processing.
Taking It To Go?
Place the Storage Lid or Spout Lid on top
of the bowl or cup and turn clockwise to seal.
NOTE: DO NOT microwave or freeze the Power Nutri™ Bowl or Power Nutri™ Cup.
WARNING: Handle the blade assembly with care, as the blades are sharp.
OR
2.
Flip container upside
down and install on base.
Rotate clockwise until it
clicks into place.
IF USING
2.
3.
When blending is
complete, remove the
container from base.
Then, remove the blade
assembly from container.
SMOOTHIE BOWL
BASICS
USING THE POWER NUTRI
1.
Add milk or a milk alternative such
as soy, coconut, almond or oat
milk, up to the LIQUID FILL line.
ALWAYS DO THIS FIRST.
3.
(Optional)
Amplify your base by adding
1 scoop of yogurt, flavour powder,
protein powder and/or nut butter.
5.
After blending is complete, add your favourite toppings such as
coconut flakes, granola, fresh bananas, berries and agave nectar.
DID YOU KNOW?
Smoothie bowls are
thicker & spoonable,
compared to
smoothies which are
thinner & drinkable.
BOWL
™
2.
Add frozen fruits, directly from freezer
and/or açaí, up to the MAX FILL line.
Cut larger fruit like bananas, in quarters.
If using açai, thaw slightly
and cut in quarters.
4.
Screw on the blade assembly and
install the bowl on the motor base.
Select MIX and twist the
Power Paddle anti-clockwise
continuously while processing.
Advertisement
