Summary of Contents for Smart Meter iBloodPressure SMBP802-GS-001
Page 1
Model SMBP802-GS-001 User Manual Arm Type Manufactured for: Smart Meter, LLC 201 E. Kennedy Blvd., Suite 880 Tampa, FL 33602 To use the monitor correctly and safely, please read the manual thoroughly. Please keep this manual in order to reference in future.
CATALOGUE CATALOGUE Table of Contents INTRODUCTION........................2 General Description Indications for Use Contraindications Measurement Principle Safety Information LCD Display Signal Components of the Device List BEFORE YOU START......................9 The Choice of Power Supply Installing and Replacing the Batteries MEASUREMENT.........................11 Tie the Cuff Taking a Measurement INFORMATION FOR USER....................14 Tips for measurement...
Warranty Smart Meter LLC warrants that this product will be free from defects in materials and workmanship for two years from the date of purchase. This warranty does not apply to the performance of an iBloodPressure ®...
Page 4
* This device may be used only for the purpose described in this booklet. The manufacturer * To avoid measurement errors, avoid electromagnetic field radiated interference signals or and Smart Meter cannot be held liable for damage caused by an incorrect application. electrical fast transient/burst signals.
* Do not open or attempt to repair or service the device at any time. SYMBOL DESCRIPTION EXPLANATION * If you have any questions or problems with this device, please contact Smart Meter Customer Service. Systolic blood pressure High pressure result...
INTRODUCTION BEFORE YOU START The Choice of Power Supply Components of the Device 1.Battery powered mode: CUFF 6VDC 4*AA batteries 2.AC adapter powered mode: 1A (not included) CUFF TUBE (Please use the AC adapter which authorized by the manufacturer!) DC POWER SOCKET AC adapter CUFF TUBE CONNECTOR CAUTION...
BEFORE YOU START MEASUREMENT Tie the Cuff Tip: AC adapter, Replace the battery or connect the symbol will be Plug the connector on cuff tube into the shown on the LCD, indicating pair-up is proceeding alternatively. device. You can press “ START/STOP ” button at any time to stop pair-up. Expose your upper arm by removing or adjusting clothing and jewelry.
MEASUREMENT MEASUREMENT Taking a Measurement 1.When the monitor is off, press the 3.If the data is successfully “ START/STOP ” button to turn on the transmitted, the symbol monitor. The cuff will automatically will disappear and the LCD inflate, complete the measurement, will display and then the and transmit the results.
INFORMATION FOR USER INFORMATION FOR USER Maintenance Tips for Measurement To get the best performance, please follow the steps below. Measurements may be inaccurate if taken in the following circumstances. Within 1 hour Immediately after Avoid contact with water, after dinner or drinking tea, coffee, smoking Store in a dry place and avoid the sunshine clean exterior with a dry cloth...
ABOUT BLOOD PRESSURE ABOUT BLOOD PRESSURE What are systolic pressure and diastolic pressure? Why does my blood pressure fluctuate When ventricles contract and pump blood out Systolic Diastolic of the heart, the blood pressure reaches its throughout the day? blood discharging blood entering maximum value in the cycle, which is called vein...
TROUBLESHOOTING SPECIFICATIONS This section includes a list of error messages and frequently asked questions for issues you may encounter with your blood pressure Battery powered mode: 6VDC 4×AA batteries monitor. AC adapter powered mode: 1A (not included) Power supply (Please only use the recommended AC adapter model).
COMPLIED STANDARDS EMC GUIDANCE Complied Standards List EMC Guidance The ME EQUIPMENT or ME SYSTEM is suitable for home healthcare environments EN ISO 14971:2012 / ISO 14971:2007 Medical devices - Application of Risk management risk management to medical devices Warning: Do not use near active HF surgical equipment and the RF shielded room of an ME system for magnetic resonance imaging, where the intensity of EM disturbances is high.
Page 13
EMC GUIDANCE EMC GUIDANCE Table 2 Table 3 Guidance and manufacturer’s declaration – electromagnetic Immunity Guidance and manufacturer’s declaration - electromagnetic Immunity IMMUNITY Radiated RF Test Band Service Modulation Modulation Distance (m) Immunity Test IEC 60601-1-2 TEST Compliance level IEC61000-4-3 Frequency (MHz) Test level...
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Contact Information Manufactured for: Smart Meter, LLC Company: Smart Meter, LLC Address: 201 East Kennedy Blvd. Suite 880 Tampa, FL 33602 www.smartmetercorporation.com...
Need help?
Do you have a question about the iBloodPressure SMBP802-GS-001 and is the answer not in the manual?
Questions and answers