Page 1
ACCESSORY SETUP INSTRUCTION FRONT BUMPER ASSEMBLY -- PN 9DS#-801400-6000 VALID FOR: MY2020 CFORCE 600 / 625 & CFORCE 600 TOURING / 625 TOURING BEFORE YOU BEGIN: Read and understand the instructions before starting any work. Make sure that all parts are ready and that you have all the tools required for assembly.
Page 2
ASSEMBLY and INSTALLATION ∥ Use a rubber hammer to install the plugs (3) into the front bumper (2). ∥ Remove the front middle rack cover (1). ∥ Turn on the main key switch, then press and hold the winch 'OUT' button to let out the winch rope approximately 30cm.
Page 3
ASSEMBLY and INSTALLATION Install the front bumper assembly: ∥ Place washers (5) on hex screws (4). Align the upper bumper mount (2) to the front rack mounting holes, then install the M6x12 bolts (3,4). Do not fully tighten bolts at this time. 5 3,4 ∥...