Section 2: General Information And Setup; Specifications - Generac Power Systems Powerwagon Owner's Manual

Section 2: General Information and Setup

Specifications

ENGINE
BATTERY
BED
3
Capacity – ft (m
Capacity – lbs (kg)
Bed height – in (cm)
Construction
Dump angle
Latch mechanism
TRANSMISSION
Speed – mph (km/h)
Brake
FRAME
Frame type
Skid plate
Handlebar height – in (cm)
ACTUATOR
Included
Full load speed – in/S (mm/S)
Full load seconds/lift
No load speed – in/S (mm/S)
No load seconds/lift
Stroke – in (mm)
Duty cycle
Enclosure rating
WHEELS (Size & Type)
Front
Rear
DIMENSIONS
Overall – in (cm)
Weight – lbs (kg)
Ground clearance – in (mm)
Owner's Manual for Powerwagon
3
)
Generac G-Force
12V, 9 Ah
8 (0.23)
800 (362.9)
20 (50.8)
Cellular core high strength molded polyethylene
N/A (Actuator latches the bed)
Forward 3: 3.7 (5.9)
Forward 2: 2.4 (3.9)
Forward 1: 1.3 (2.1)
Reverse: 1.4 (2.3)
Transaxle disc brake
Tubular steel - 1.5 in (38.1 mm) diameter x 12 Ga thick
9 Ga thick
37 (94)
0.47 (12)
0.79 (20)
7.87 (200)
10% (Approximately 1 full capacity load every 4.5 minutes)
16 in (40.6 cm) diameter, 4 in (10.2 cm) width, Snowhog tread
11 in (28 cm) diameter, 4 in (10.2) width, Rib
63.25 x 34.5 x 41 (161 x 87.6 x 104)
240 (108.9)
2 (50.8)
General Information and Setup
60°
Yes
17
10
IP65
7