Stirling TF4601TR-S Quick Start Manual

A

Have you got everything?

When unpacking the appliance, make
sure to check all parts in the package
carefully so you don't miss any of the
small bags.
1
The tower fan comes ready assembled.
The base comes in two parts. You have to
2
attach it to the body of the fan before use.
The tower fan can be operated either
from the control panel at the front, or with
3
the supplied remote control, or remotely
using the in-built Wi-Fi module.
Two batteries for the remote control are
4
supplied separately in small bag.
Also included is a small bag with four
5
wing screws for securing the base to the
body of the fan.
Keep in mind that this quick start guide
6
only contains basic instructions to get
you started.
For the full picture, please refer to the
7
supplied instruction manual, which has
comprehensive installation and usage
instructions and important safety advice.
Keep the warranty certificate in a safe
8
place for future reference.
9
Quick Start Guide
premium tower fan ready to use, fast!
10
11
Let's get your new 117cm
1
2

Assembling the fan

The base of the tower fan comes in two parts
which fit around the tower. Both parts fit easily
together; the back half is the one with cut-outs
First attach the front half of the base: align the
holes in the base with the screw holes at the
base of the tower fan and lead the power cord
through the centre hole. Then snap the back
half of the base to the front half.
Turn over the fan and secure the base with the
Thread the power cord through the two
cut-outs at the bottom of the base.
instructions, turn over the page ...
Model: TF4601TR-S
3
6
7
QSG IM
Never use the fan until it
is properly assembled and
affixed securely on the base.
for the power cord.
supplied wing screws.
Nearly done! For operation
4
5
8
WC
B
9
10
11