Heated Seats; Seat And Mirror Memory - BMW 2010 M3 Owner's Manual

Hide thumbs Also See for 2010 M3:
Table of Contents

Advertisement

Depending on the equipment version, it may be
possible to fold down the outer rear head
restraints as well.
Only fold the head restraints down if no
passengers will be sitting in the rear. Fold
up the head restraints before transporting pas-
sengers in the
rear.<

Heated seats*

Press the button once per temperature level.
Three LEDs indicate the highest temperature.
To switch off:
Press button longer.
If you continue driving within approx. the next
15 minutes, the seat heating is automatically
activated at the previously set temperature.
The temperature is lowered or the heating is
switched off entirely to save on battery power.
The LEDs stay lit.

Seat and mirror memory*

You can store and call up two different combi-
nations of driver's seat and exterior mirror posi-
tions.
Settings for the backrest width and lumbar sup-
port are not stored in memory.
Online Edition for Part no. 01 41 2 603 066 - © 08/09 BMW AG
Online Edition for Part no. 01 41 2 603 066 - © 08/09 BMW AG
Storing
1.
Switch on radio readiness or the ignition,
refer to page 54.
2.
Adjust the seat and exterior mirrors to the
desired positions.
3.
Press the
button.
The LED in the button lights up.
4.
Press the desired memory button 1 or 2: the
LED goes out.
The driver's seat and exterior mirror posi-
tions are stored for the remote control cur-
rently in use.
Call-up
Do not call up the memory while you are
driving; otherwise, unexpected seat
movement could result in an
Comfort function
1.
Unlock and open the driver's door or switch
on radio readiness, refer to page 54.
2.
Briefly press the desired memory button 1
or 2.
The adjusting procedure is halted immediately
when you touch a seat adjustment switch or
one of the memory buttons.
Safety feature
1.
Close the driver's door and switch the igni-
tion on or off, refer to page 54.
2.
Press the desired memory button 1 or 2
and keep it pressed until the adjustment
process has been completed.
If the
button was pressed accidentally:
Press the button again; the LED goes out.
accident.<
45

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents