Edic ENDEAVOR 9000I-HSH Owner's/Operator's Manual
  1. Manuals
  2. Brands
  3. Edic Manuals
  4. Ventilation Hood
  5. Endeavor 9000I-HSH
  6. Owner's/operator's manual

Edic ENDEAVOR 9000I-HSH Owner's/Operator's Manual

Multi-purpose extractor
Hide thumbs Also See for ENDEAVOR 9000I-HSH:
Table of Contents

Advertisement

Quick Links

Download this manual
Electronic
Service
Manuals
This electronic document is provided as a service to our customers.
We do not create the contents of the information contained in this
document. Should you have detailed questions pertaining to the
information contained in this document, you may contact Michco, or
the manufacturer which provided the original information in this
electronic deliverable. Michco's only part in this electronic deliverable
was the electronic assembly process. By providing this manual online
we are not guaranteeing parts availability.
You may contact Michco through the following methods:
Phone (517) 484-9312
2011 N. High St. -- Lansing, Michigan -- 48906
Fax: (517) 484-9836
Email: CustomerService@Michco.com
Website: www.Michco.Com
Order Parts online at:
www.Michco.Com
Directly to Parts & Service:
By Email:
CustomerService@Michco.com
By Fax: (517) 484-9836
By Voice: (517) 484-9312
Serving the Cleaning Industry Since 1922
Notice: All copyrighted material remains property of original owners, all trademarks are property of respective owners.
Manuals are subject to Manufacturer's reproduction limitations. Originals or reproductions were provided by manufacturers
through a request. We make no warranty as to the correctness of information provided in this document and you assume
all risk. By placing these manuals on line we are not declaring our corporation to be an manufacturer authorized dealer or
provider, please check our web site for authorized manufacturers we represent.

Advertisement

Table of Contents
loading

Related Manuals for Edic ENDEAVOR 9000I-HSH

Summary of Contents for Edic ENDEAVOR 9000I-HSH

  • Page 1 Electronic Service Manuals This electronic document is provided as a service to our customers. We do not create the contents of the information contained in this document. Should you have detailed questions pertaining to the information contained in this document, you may contact Michco, or the manufacturer which provided the original information in this electronic deliverable.
  • Page 2 ENDEAVOR 9000I-HSH MULTI-PURPOSE EXTRACTOR OWNER’S/OPERATOR’S MANUAL PROUDLY DESIGNED AND MANUFACTURED BY Revision 1 EDIC-USA.COM 6-5-17 For commercial use only...

  • Page 3: Table Of Contents

    TABLE OF CONTENTS RECEIVING YOUR EQUIPMENT................... WARNINGS AND SAFETY....................3, 4 ELECTRICAL INFORMATION..................MAINTENANCE........................ MACHINE LAYOUT......................CONTROL PANEL OVERVIEW..................POWER CORD AND CIRCUIT LOCATOR OPERATION........CONNECTING VACUUM AND SOLUTION HOSE..........ROCOVERY TANK FILTERS................... AUTO-FILL/ AUTO-DUMP....................PRIMING THE PUMP....................... ADJUSTING PUMP PRESSURE..................OPERATING INSTRUCTIONS FOR HEATER.............

  • Page 4: Receiving Your Equipment

    Do not use replacement parts other than those specified in the parts list. Equipment performance could be affected if with the claim and will attempt to expedite a resolution. substitutions are made. Use of no-EDIC parts will void the warranty. PLEASE READ BEFORE OPERATING YOUR •...

  • Page 5: Electrical Information

    GFCI box marked Reset “RESET” button Do not attempt repairs yourself. EDIC will assist you in on the GFCI box. locating an indepedent service contractor. GROUNDING INSTRUCTIONS: This piece of equipment must be grounded.

  • Page 6: Maintenance

    • KIT B, VALVE SET: PART #G13333-2 • Do not handle plug or appliance with wet hands. • This equipment should be stored indoors and not Contact EDIC for PUMP maintenance instructions. exposed to rain.

  • Page 7: Machine Layout

    ENDEAVOR OVERVIEW 1. Handle: Used to position and maneuver the machine. 8. Rear caster wheels: Allow the machine to be placed 2. Recovery tank and access point. Lid can be removed on its back when loaded onto a vehicle. for cleaning of recovery tank. 9.

  • Page 8: Control Panel Overview

    CONTROL PANEL OVERVIEW PUMP HEATER PUMPOUT 1. Vacuum power switch. “l” is on. “O” is off. 2. Pump Power switch. “l” is on. “O” is off. 3. Heater power switch. “l” is on. “O” is off. 4. Circuit locator confirmation light: Lights up green when both power cords are on two separate circuits. 5.

  • Page 9: Power Cord And Circuit Locator Operation

    CONNECTING THE POWER CORDS: USING THE CIRCUIT LOCATOR: The ENDEAVOR has a built in circuit locator. When The ENDEAVOR uses POWERCON twist lock connec- the unit is plugged into two separate circuits, the circuit tors on the end of the GFCI powercords. These mate to locator confirmation light will turn on.

  • Page 10: Rocovery Tank Filters

    RECOVERY TANK FILTERS: VACUUM INTAKE FILTER AND VACUUM SHUT OFF: VACUUM PRE-FILTER BAG: The vacuum intake filter houses the float ball which is in place to shut off airflow to the vacuum motor when there The intake Pre-filter bag has been designed to catch larger is too much fluid in the waste tank.

  • Page 11: Auto-Fill/ Auto-Dump

    UTILIZING AUTO-FILL & AUTO-DUMP: PRIMING THE PUMP: This machine is equipped with the ability to self-regulate THE ENDEAVOR HAS A PISTON PUMP WHICH the levels of fluid in the solution tank and the recovery IS NOT SELF-PRIMING. SHOULD AIR BE INTRO- tank.

  • Page 12: Adjusting Pump Pressure

    ADJUSTING PUMP PRESSURE: OPERATING THE HEATER FOR CARPET AND UPHOLSTERY CLEANING: This machine is equipped with a pressure regulator (see #6 on page 7), that allows the operator to adjust the pres- The 9000I-HSH is equipped with a 2000watt heater. The sure between 100PSI and 1100PSI.

  • Page 13: Cleaning Carpet

    HOW TO SETUP THE ENDEAVOR FOR MOUNTING THE OPTIONAL 991RS AC- CLEANING CARPET OR UPHOLSTERY: CESSORY CHEMICAL INJECTOR SYSTEM 1. Plug in power cords as per instructions on page 8. (NOT INCLUDED): 2. Make sure you are on 2 circuits. 3.

  • Page 14: Setup Of 991Rs System (Optional)

    SET UP OF THE OPTIONAL 991RS ACCES- STEP 3. The intake bottle caps, and the clear hoses that are at- SORY CHEMICAL INJECTOR SYSTEM tached to them, are designed to be removed and inter- (NOT INCLUDED): changed by way of a quick release system. When you first receive your new 991RS, you will need to install the STEP 1.
  • Page 15 STEP 4. STEP 6. Separate the clear hose from the intake bottle cap. Once the tip has been installed, push the clear hose back into place over the hose barb. STEP 7. STEP 5. Place your chemical bottles in the bottle holders and Locate the brass threaded insert on the intake bottle cap install the threaded intake caps.

  • Page 16: Using A 9000Ac Sprayer (Optional)

    SELECTING CHEMICAL ON OPTIONAL USING OPTIONAL 9000AC SPRAYER 991RS (NOT INCLUDED): (NOT INCLUDED): Use the spray collar to select between low pressure chem- Use the chemical selector valve to change between the ical application or high pressure rinse. Pop “OUT” for left side and right side bottle holders.
  • Page 17 spray gun. 4. Fill the machine with water. See page 10 for auto fill instructions. 5. Prime the pump as per instructions on page 9. 6. Adjust the pressure to 500psi. See instructions on page 9. 7. Chemical will draw only in the “LOW” pressure setting of your pressure gun.
  • Page 19 9000I-HSH ENDEAVOR SOLUTION TANK EXPLODED VIEW 5/5/2017 ITEM NO. PART NUMBER DESCRIPTION QTY. A00118 BUSHING, 1/4 FP X 3/8 SAE A11949 3/8 MF 90 DEGREE ELBOW A13271 3/8 FP X 1/2 BARB, ELBOW A13445 3/8 MIP HEX NIPPLE A13606 3/8 X 1/4 FIP X MIP, ADP A13849 ELBOW, 90 DEGREE, 3/8H x 3/8F C00233...
  • Page 21 9000I-HSH ENDEAVOR RECOVERY TANK EXPLODED VIEW 5/5/2017 ITEM NO. PART NUMBER DESCRIPTION QTY. SOLUTION HOSE, HIGH PRESSURE, 10" J00580 SOL. HOSE, 10" J00659 SWAGE FITTING, 1/4MP J00660 SWAGE FITTING, 1/4FP A00052 90 DEGREE ELBOW, .25" MP X .25" FP A00060 BARB, .375"...
  • Page 22 9000I-HSH ENDEAVOR RECOVERY TANK EXPLODED VIEW 5/5/2017 ITEM NO. PART NUMBER DESCRIPTION QTY. D13857 SPACER, ALUMINUM 2" D14140 U-CLAMP E11128 GASKET, DRAIN VALVE E13338 GASKET E13686-A GASKET, AIR INTAKE E13686-B GASKET, AIR INTAKE E13830 GASKET, RECOVERY LID F12118 HOLE COVER, SWITCH F13242 DECK PLATE F13294...
  • Page 24 9000I-HSH ENDEAVOR BASE EXPLODED VIEW 5/5/2017 ITEM NO. PART NUMBER QTY. DESCRIPTION SOL. HOSE, HIGH PRESSURE J00580 SOL. HOSE, 6' J00660 SWAGE FITTING, 1/4FP 720HR HEATER A12917 ELBOW, .25" F X .375" M, NPT A13078 PLUG, MALE, 3/8" A13257 SWIVEL, 3/4 FGH X 1/2 FP A13258 1/2 HOSE BARB X 1/2 FP A13260...
  • Page 25 9000I-HSH ENDEAVOR BASE EXPLODED VIEW 5/5/2017 ITEM NO. PART NUMBER QTY. DESCRIPTION C13389 SCREW, 10-24 X 1 1/2, TRUSS C13391 SCHS 3/8-16 x 4 1/2 SS C13431 1/4-20 X 2 1/2 SHCS, ZINC PLATED C13432 1/4-20 X 1 1/2 SHCS, ZINC PLATED C13433 LOCKNUT, 5/16-18, NYLON C13434...

Table of Contents