How To Configure Rak7200 - RAKwireless RAK7200 Get Started

v2.0.0.0.0
Note: If you haven't a serial port tool, we recommend you to use RAK serial port tool.
You can get it from RAK website and use it freely.
http://docs.rakwireless.com/en/LoRa/RAK811/Tools/RAK_SERIAL_PORT_TOOL_V1.
2.1.zip

3. How to configure RAK7200?

You can configure LoRa Button by sending AT commands into it from a serial port tool
running on your PC.
The following list shows the AT commands:
AT Command Description
at+version Get the current firmware version
number.
at+get_config=device:status Get all information about the device's
hardware components and their current
status.
at+set_config=device:restart After set, the device will restart.
9