v2.0.0.0.0
1. Where is the latest firmware file?
If you want to get a pre-compiled firmware instead of compiling the source code by
yourself, you can find the latest firmware on RAK website after it is released.
2. How to burn the update firmware into
RAK7200?
Firstly, please install the "STM32CubeProgrammer" tool on your Windows PC. You
can download it from here:
https://www.st.com/content/st_com/en/products/development-tools/software-develop
ment-tools/stm32-software-development-tools/stm32-programmers/stm32cubeprog.h
tml#overview
Secondly, connect RAK7200 with your PC's USB interface as follow:
Now, you need to let RAK7200 work in boot mode. You can do it as follow:
3