Table of Contents
Advertisement
3.
Select "Drivelogic:".
4.
Turn the controller to set the drive mode or
sequential mode.
"Unchanged" retains the current settings
made outside of MDrive.
5.
Press the controller to select the drive pro-
grams.
6.
Turn the controller to set the drive program.
7.
Press the controller.
Shift Lights
To achieve the best possible acceleration in
sequential mode when using a sporty driving
style, the Shift Lights in the instrument cluster
indicate the best shift point just before the max-
imum engine speed is reached.
62
Online Edition for Part no. 01 41 2 600 999 - © 08/08 BMW AG
1.
As the vehicle approaches its maximum
engine speed, the yellow LEDs 1 light up
consecutively to indicate the impending
shift point.
2.
At the latest, shift when the red LEDs 2 light
up.
The LEDs flash when the maximum allowable
engine speed is reached. When the maximum
engine speed is exceeded, the fuel supply is cut
off to protect the engine. Avoid engine speeds
in this range at all costs.
Switching the Shift Lights on/off
For operating principle, refer to page 71.
1.
Switch on the ignition, refer to page 55.
2.
Lightly push button 1 in the turn indicator
lever up or down repeatedly until the sym-
bol appears in the display accompanied by
the word "SET".
Advertisement
Table of Contents
