Table of Contents
Advertisement
3.
Select the desired function.
4.
Select the desired setting.
"Unchanged" retains the current setting
made outside of MDrive.
The setting is stored for the remote control cur-
rently in use.
Activating the settings
Press the
button on the steering wheel.
The indicator lamp in the instrument
cluster comes on. The settings made
on the Control Display for the functions
in MDrive are active.
Pressing the button again deactivates MDrive.
If the indicator lamp flashes after the but-
ton was pressed, MDrive was unable to
respond because the Antilock Brake System
ABS or Dynamic Stability Control DSC are cur-
rently regulating driving stability. Press the
button again when the indicator lamp is no
longer
flashing.<
You can change individual settings outside of
MDrive even when MDrive is activated, e.g.
using the buttons on the center console. To
reactivate all settings made on the Control Dis-
play for MDrive: press the
Online Edition for Part no. 01 41 2 600 999 - © 08/08 BMW AG
Resetting the settings
You can reset all MDrive settings to their default
values:
1.
2.
3.
4.
5.
M Key settings
For the remote control currently in use, you can
set your preferred program for the M Engine
Dynamics Control, the Electronic Damper Con-
trol EDC and the Shift Lights. These preset-
tings are called up when the engine is started.
1.
2.
3.
button twice.
"Settings"
"MDrive"
Move the controller to the right repeatedly
until the "Options" menu is selected.
"Reset"
"Yes"
"Settings"
"MDrive"
Move the controller to the right repeatedly
until the "Options" menu is selected.
51
Advertisement
Table of Contents
