B. Paper feed motor
1) Remove the feed motor mount plate
according to step 1) to 4) in the regis-
tration clutch removal procedures on
page 3-14.
2) Remove the 2 screws and feed motor.
Screws
Feed motor
Figure 3-7-2
C. Paper deck drive motor
1) Remove the pick-up unit according to
the pick-up unit removal procedures on
page 3-5.
2) Remove the 3 screws, disconnect the
connector, and then take out the paper
deck drive motor unit by sliding it
upward.
Screws
Connector
Paper deck drive motor unit
Figure 3-7-3
CHAPTER 3
3 - 17