Canon PD-82K Service Manual page 40

CHAPTER 3
5. Front sub cover
1) Remove the rear cover, left cover and
right cover.
2) Unhook the 4 hooks and slide the front
sub cover with the status LED PCB
toward you.
Hooks
Status LED PCB
Front sub cover
Figure 3-2-6
3) Remove the 2 claws and the front sub
cover.
Claws
Front sub cover
Figure 3-2-7
3 - 4
6. Housing unit
1) Remove the rear cover, left cover and
right cover.
2) Remove the 4 hooks, then slide the
housing unit in the direction of the
arrow to remove it.
Hooks
Housing unit
Figure 3-2-8