YOODA MAGNETIC PRO YSH Instruction Manual

MAGNETIC_PRO_1Rw YSH
To use the technical capability of MAGNETIC PRO YSH transmitters optimally, read the following instructions carefully. MAGNETIC PRO YSH transmitters
are compatible with all devices of YOODA SMART HOME system.
MAGNETIC PRO YSH transmitters is control dedicated to bidirectional communication.
1. Technical data
MAGNETIC PRO YSH single channel remote control without a display, white
(MAGNETIC PRO_1Rw YSH)
The range given by the manufacturer is a variable value, depending on the conditions in the environment in which the device
works. Factors such as building structure, signal interference from other devices, etc. affect range.
2. Description of the device
Single channel transmitter
(front)
1. Open the battery case to obtain access to the battery.
2. Lifespan of the battery is ca. 1 year while executing approximately 4 commands per day.
3. The batteries need replacing when the integrated LED diode does not turn on, or when the receiver stops reacting while
you press the buttons.
4. Pay attention to polarisation of the battery while replacing it.
Batteries contain substances that may present risk to health or serious environment degradation. Used batteries must be
disposed of in specially marked containers.
1. Control:
possibility to control 1 motor
or a group of up to 20 motors
2. Range:
up to 200 meters in open area,
up to 35 meters indoors
3. Battery:
CR2430
4. Power supply:
3 V
5. Dimensions:
80 x 80 x 15 mm
6. Signal power:
10 mW
7. Operation temperature:
from 0°C to 50°C
8. Safety degree:
IP 30
LED diode
UP button
STOP button
DOWN button
P2 programming
button
1
M
P2 P2
Single channel transmitter
(back)
battery