Figure 3-12: Crystal Oscillator; Figure 3-13: Pin Alignment Of Crystal Oscillator And Socket - NEC IE-78K0-NS-P04 Preliminary User's Manual

IE-78K0-NS-P04, IE-780828-NS-EM4
(b) When using a crystal oscillator
- Items to be prepared
- Crystal oscillator (see pinouts shown in Figure 3-7)
<Steps>
<1> Prepare the IE-78K0-NS-P04.
<2> Remove the parts holder inserted in the socket (marked "X2") on the IE-78K0-NS-P04.
<3> Connect the parts board (from <2> above) to the socket (X2) from which the parts holder
was removed. Insert the crystal oscillator into the socket so as to align the pins as shown
in the figure below.

Figure 3-13: Pin Alignment of Crystal Oscillator and Socket

Crystal oscillator
NC
GND
<4> Install the IE-78K0-NS-P04 and the IE-780828-NS-EM4 in the IE-78K0-NS-A.
38

Figure 3-12: Crystal Oscillator

NC
GND
Socket
V
CC
1
2
3
4
5
6
CLOCK OUT
7
Vcc
Clock Out
Crystal Oscillator Pin Name
14
NC
13
GND
12
CLOCK OUT
11
10
V
CC
9
8
Socket Pin No.
1
7
8
14