Samsung SVMI-20E Installation Manual page 14

ip address 192.168.25.33/24
# Set the IP time to live value
ip ttl 64
# Define an interface type 'packet driver' called 'if0'
# Class is 'dix', MTU = 1500, interrupt 60h, IRQ=10
interface pdr if0 dix 1500 05 0x60 10
# Define the default gateway used by interface 'if0'
route add default if0 192.168.25.1
# Define a host to use as a DNS server
# domain server 192.168.25.1
# Set the Maximum Segment Size and Window size
tcp mss 1460
tcp window 2920
# Set the initial round trip time and retry counts
tcp irtt 500ms
tcp retry 6
9. Now you must save your changes. Press [ESC] then press [F] to open the File Menu
10. Press [X] to exit and then [Y] to save your changes and exit.
11. You will now be at the C:\Sockets> DOS prompt.
12. Now press the RED reset button on the SVMi-20E and let the unit come up normally.
† A # in front of a line in the Socket.CFG file tells the application to ignore, skip over, and
NOT execute the line.
Using SCONFIG
SCONFIG.EXE is a utility provided by the TCP/IP software used for creating a SOCKET.CFG file. It
will ask you a few questions that help you create the connections setting for the SVMi-20E
to communicate on your network. To use SCONFIG you must also be at a DOS c:\> prompt
as described previously before using the NED text editor.
From a DOS C:\> prompt:
1. Change directory to 'Sockets'
Type: sconfig
2. Press [1] to continue configuration
3. Press [1] to select Network Card (Packet Driver)
4. Press [1] to select Static Addressing (Manual)
5. Enter the IP address and Subnet mask you want to use. (10.10.108.6/24 is the default IP
Address)
Example: 192.168.1.32/24
In the above example the SVMi-20E IP address would be 192.168.1.32. That is the address
other devices on the network would use to reference or communicate with the SVMi-20E.
SVMi-20E Installation / May 2009 14