Barkmate 113R Manual

Barkmate 113R Manual

Dog training system

Advertisement

Quick Links

113R Remote Training Kit Contents

1.
Remote Trainer Transmitter
2.
113R Receiver Collar (Medium to Large Size Dogs)
3.
113R Collar and Remote Transmitter Charger
4.
1 Pair of Long Contact Probes for long hair dog

Features:

Up to 800 metres range
Expandable to control 3 dogs (with purchasing extra collar)
Waterproof (IPx7)
Tone, Vibration and 10 variable levels in both continuous and nick stimulation
Transmitter and collar are rechargeable with 3 hours quick charge
Easy to use, comfortable and ergonomic transmitter
Battery indicator
The Barkmate 113R Receiver Collar
The Standard Barkmate 113R Receiver Collar can be used for Barkmate Dog Fence system as well as Barkmate Remote Dog Training System. This collar has two
operating mode which are Dog Fence Mode and Dog Training Collar Mode. Please make sure the collar is in Dog Training Collar mode before using.

LED Indicator

This indicates the status: On/Off,
Low battery, and Charging status
On/Off Button – change operating mode
Press and hold on 4 seconds to turn the collar on. The Collar will beep twice rapidly, and the green LED light will flash once every 5 seconds. Press and hold on 4
seconds to turn the collar off. The collar emits a long beep, and the LED light will turn off. NOTE: when turning the collar off, it is very IMPORTANT to release the
button after the LONG BEEP, or the collar will go into pairing mode. It will lose the connection with the OPTIONAL remote transmitter.

Switch between Fence Collar only mode or Dog Training Collar mode

Fence Collar only mode: Containment only, LED flashes Green twice every 5 seconds
Dog Training Collar mode: Remote training activated, LED flashes Green once per 5 seconds
Change the operating mode when the collar is ON! Press and hold the ON/OFF button while the collar is on for 2 seconds, the LED will turn Red. Release the
Button immediately, the Green light will flash either once or twice to indicate the current operating mode. Twice every 5 second is the Fence only Mode and
once every 5 second is the Dog Training Mode. To change the mode, repeat the step. If the ON/OFF button has been pressed too long, the collar will be turned
off and you will hear a long beep.
The 113R collar has 3-hour fast charge battery. The LED will flash Red when it needs to charge, and Green means fully charged.

The Barkmate Remote Training Transmitter

Stimulation Level Adjustment Button

"
" and "
" to adjust the stimulation output. Press
Barkmate 113R Dog Training System Manual
Antenna
Stimulation Level
Adjustment Button
On/Off Button
Dog Collar Selector
Dog 1, Dog 2, Dog 3
to increase and

Contact Probes

Use the short or long probes to match your
dog's coat.
On/Off Button

Charging Port

To charge, open the rubber cover
and insert the adaptor plug into Jack.
LCD display
LED indicator
Static Correction Button
Charging Port Cover
to decrease. The Maximum level is 10.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 113R and is the answer not in the manual?

Questions and answers

Summary of Contents for Barkmate 113R

  • Page 1 The Barkmate 113R Receiver Collar The Standard Barkmate 113R Receiver Collar can be used for Barkmate Dog Fence system as well as Barkmate Remote Dog Training System. This collar has two operating mode which are Dog Fence Mode and Dog Training Collar Mode. Please make sure the collar is in Dog Training Collar mode before using.
  • Page 2 Please Note: The LED flashes Red when the battery is low. The Barkmate Training remote is able to control up to 3 collars. You may need to unpair the collar before you can pair it with the new remote as the collar may be paired with a different remote for testing purpose from the factory.

Table of Contents