Tripp Lite DWM60100XX Owner's Manual page 4

1a. Mount on Wood Stud Wall
D8 Washer
• Make sure that mounting screws are anchored into the center of the studs.
Use of a stud finder is highly recommended.
• Installers are responsible to provide hardware for other types of mounting situations.
• Installers must verify that the supporting surface will safely support the combined
load of the equipment and all attached hardware and components.
14-10-267-9333EE.indb 4
Anchor Bolt
WARNING
90mm
(3.5")
1
Find and mark the exact location of
Wall Template
Anchor Bolt
4
2
mounting holes
3
Drill pilot holes
Screw the wall
mount onto
the wall
12/3/2014 4:46:43 PM