Seat Heating; Active Seat Ventilation - BMW 2007 5 Series Owner's Manual

Seat heating*

Front
The appearance and arrangement of the but-
tons may vary depending on the equipment.
1 Seat heating, three LEDs
2 Seat heating, one LED
3 Seat heating with active seat ventilation
Press the respective button once per tempera-
ture level. The temperature level is shown on
the Control Display with buttons 2 and 3. The
maximum temperature is supplied when three
LEDs are lit.
To switch off: press button longer.
Temperature distribution without

active seat ventilation

The heat output can be distributed variously in
the seat cushion and the backrest.
iDrive, for explanation of principle, refer to
page 16.
1. Open the start menu.
2. Move the controller to the left to open "Cli-
mate".
3. Select "Seat heater distribution" and press
the controller.
Online Edition for Part no. 01 41 0 013 308 02/07 BMW AG
4. Move the controller to the left or right to
select "Driver" or "Passenger".
5. Turn the controller to adjust the distribu-
tion.
The setting is applied.
Temperature distribution with active
seat ventilation
The heat output can be distributed variously in
the seat cushion and the backrest.
iDrive, for explanation of principle, refer to
page 16.
1. Open the start menu.
2. Move the controller to the left to open "Cli-
mate".
3. Select "Driver's seat climate" or "Passen-
ger's seat climate" and press the controller.
*
Turn the controller to adjust the distribution.
The setting is applied.
51