Saving Destination - BMW 2007 5 Series Owner's Manual

The town/city can also be selected from the list
via iDrive:
Turn the controller until the destination is
selected and press the controller.
Entering the destination as an entire
word*
Towns/cities and streets located in the region
where the language of the voice command sys-
tem is spoken can be entered as an entire word.
Example: to enter a US destination as an entire
word, the system language must be English.
The condition for this is the use of a suitable
navigation DVD.
Speak smoothly and at normal volume, avoiding
excessive emphasis and pauses.
1. Wait for the system to request the destina-
tion.
2. Say the name of the destination.
The system can suggest up to 6 destina-
tions that match your entries.
A destination is suggested by the system.
3. Select town/city:
> Select highlighted town/city: {Yes}
> Select other town/city: {No}
> Select entry, e.g. {Entry 3}
> To reenter the town/city: {Repeat}
>
To enter the town/city by spelling:
{Spell}
The town/city can also be selected from the list
via iDrive:
Turn the controller until the destination is
selected and press the controller.
146
Online Edition for Part no. 01 41 0 013 308 02/07 BMW AG
Destinations that sound the same which
cannot be differentiated by the system
are summarized in a separate list and shown as
a destination followed by three dots.
Select this entry with {Yes} if necessary. Then
select the desired town/city from this
Entering street and house number
The street is entered in the same way as the
destination.
To enter the house number:
1. {House number}
2. Say the house number.
Up to 4-digit house numbers can be entered.
Say the house number as individual numbers.
Starting destination guidance
{Start guidance}
Destination guidance starts immediately.

Saving destination

The destination is added to the destination list
or can be stored in the address book.
{Add to destination list} or
{Add to address book}
Map-guided destination
selection
If you only know the location of the town/city or
street of the destination, then you can enter the
destination by using a map. You can use the
cursor to select the destination on the map and
then adopt it into the destination guidance.
1. Select "Navigation" and press the control-
ler.
"New destination" is selected.
2. Press the controller.
list.<