Trip Computer - BMW 2007 6 Series Owner's Manual

For different routes
You can display the average speed and average
consumption for two different routes on the
Control Display, refer to the following and to

Trip computer.

Displays on Control Display
You can also call up the computer via iDrive, for
explanation of principle, refer to page 16.
1. Press the button.
This opens the start menu.
2. Move the controller to the right to open
"Navigation".
Without navigation system
Data".
3. Select "Car Data" and press the controller.
4. Select "Onboard info" and press the con-
troller.
> Estimated time of arrival at destination and
remaining distance:
> Entering a distance manually in the com-
puter, see below.
> Entering a destination in the navigation
*
system , refer to page 126.
> Cruising range
Online Edition for Part no. 01 41 0 013 312 - © 02/07 BMW AG
>
>
Resetting values
You can reset the values for average speed and
average fuel consumption:
1.
2.
Entering a distance manually
1.
*
: open "Car
2.
3.
The distance is automatically predetermined
during the destination guidance of the naviga-
tion system
Trip computer
The trip computer is suitable for a vacation trip,
for example.
1.
2.
3.
Average speed
Average fuel consumption
Select the desired menu item and press the
controller.
Press the controller again to confirm.
Select "Distance to dest." and press the
controller.
Turn the controller to select the distance
to your destination. If necessary, hold it
against a slight resistance to enter a greater
difference.
Press the controller to apply the setting.
*
.
Open the start menu.
Open "Navigation".
Without navigation system
Data".
Select "Car Data" and press the controller.
*
: open "Car
77